D-Link xStack DGS-3620 Series - Page 590

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
585
DGS-3620-28PC:admin#show ipmc
Command: show ipmc
Interface Name IP Address Multicast Routing
--------------- --------------- -----------------
System 10.90.90.90 INACT
n1 1.3.2.3 PIM-SM
n2 2.3.2.3 PIM-SM-DM
n3 3.3.2.3 PIM-DM
n4 4.3.2.3 DVMRP
Total Entries : 5
DGS-3620-28PC:admin#
48-2 show ipmc cache
Description
This command is used to display the IP multicast forwarding cache.
Format
show ipmc cache {group <group>} {ipaddress <network_address>}
Parameters
group - (Optional) Specifies the multicast group.
<group> - Enter the multicast group used here.
ipaddress - (Optional) Specifies the IP address used.
<network_address> - Enter the IP address used here.
If no parameter is specified, the system will display all IP multicast forwarding cache entries.
Restrictions
None.
Example
To display the IP multicast forwarding cache: