D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
586
DGS-3620-28PC:admin#show ipmc cache
Command: show ipmc cache
IP Multicast Forwarding Table
Multicast Source Upstream Expire Routing
Group Address/Netmask Neighbor Time Protocol
--------------- ---------------------- --------------- ------ ---------
224.1.1.1 10.48.74.121/8 10.48.75.63 30 DVMRP
224.1.1.1 20.48.74.25/8 20.48.75.25 20 PIM-DM
224.1.2.3 10.48.75.3/8 10.48.76.6 30 DVMRP
Total Entries : 3
DGS-3620-28PC:admin#
48-3 show ipmc statistics counter
Description
This command is used to display the received and sent multicast packet statistics counters
according to the message type.
Format
show ipmc statistics counter {igmp | pim | dvmrp} {ipif <ipif_name 12>}
Parameters
igmp - (Optional) Specifies to display both sent and received IGMP packets counters.
pim - (Optional) Specifies to display both sent and received PIM packets counters.
dvmrp - (Optional) Specifies to display both sent and received DVMRP packets counters.
ipif - (Optional) Specifies the IP interface to display.
<ipif_name 12> - Enter the IP interface's name here. This name can be up to 12 characters
long.
Restrictions
None.
Example
This example shows how to display the multicast protocol packets counters on the Switch.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English