D-Link xStack DGS-3620 Series - Page 592

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
587
DGS-3620-28PC:admin# show ipmc statistics counter
Command: show ipmc statistics counter
IGMP Packets Counter
Received Sent
IGMP Query v1/v2/v3 0/0/0 0/0/0
IGMP Report v1/v2/v3 0/0/0 0/0/0
IGMP Leave 0 0
Unknown IGMP 0 0
PIM Packets Counter
Received Sent
PIM Hello 0 0
PIM Register 0 0
PIM Register-Stop 0 0
PIM Join/Prune 0 0
PIM Bootstrap 0 0
PIM Assert 0 0
PIM Graft 0 0
PIM Graft-Ack 0 0
PIM C-RP-Adv 0 0
PIM State Refresh 0 0
Unknown PIM 0 0
DVMRP Packets Counter
Received Sent
DVMRP Probe 0 0
DVMRP Report 0 0
DVMRP Prune 0 0
DVMRP Graft 0 0
DVMRP Graft-Ack 0 0
Unknown DVMRP 0 0
DGS-3620-28PC:admin#
48-4 clear ipmc statistics counter
Description
This command is used to clear the multicast protocol packet statistics counters on the Switch.
Format
clear ipmc statistics counter {igmp | pim | dvmrp}
Parameters
igmp - (Optional) Specifies to clear IGMP packets counters.
pim - (Optional) Specifies to clear PIM packets counters.
dvmrp - (Optional) Specifies to clear DVMRP packets counters.