D-Link xStack DGS-3620 Series - Page 599

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
594
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example configures access list “List1” to add one entry:
DGS-3620-28PC:admin# config ip standard access_list List1 add 10.10.10.0/24
permit
Command: config ip standard access_list List1 add 10.10.10.0/24 permit
Success.
DGS-3620-28PC:admin#
49-7 delete ip standard access_list
Description
This command is used to delete an access list used from the route filters.
Format
delete ip standard access_list [list_name <list_name 16> | all]
Parameters
list_name - Specifies the name of the access list used.
<list_name 16> - Enter the name of the access list used here. This name can be up to 16
characters long.
all - Specifies that all the access list will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an access list with the name ”List1”:
DGS-3620-28PC:admin# delete ip standard access_list list_name List1
Command: delete ip standard access_list list_name List1
Success.
DGS-3620-28PC:admin#
49-8 show ip standard access_list
Description
This command is used to display the information of an access list.