D-Link xStack DGS-3620 Series - Page 606

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
601
DGS-3620-28PC:admin# show route_map map1
Command: show route_map map1
route_map : map1
--------------------------
sequence : 10 (Permit)
Match clauses:
access_list : ac_list1
Set clauses:
metric : 50
DGS-3620-28PC:admin#
49-14 create ipv6 prefix_list
Description
This command is used to create an IPv6 prefix list.
Format
create ipv6 prefix_list <list_name 16>
Parameters
<list_name 16> - Enter the IPv6 prefix list name here. This name can be up to 16 characters
long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to create one IPv6 prefix list named 1.
DGS-3620-28PC:admin# create ipv6 prefix_list 1
Command: create ipv6 prefix_list 1
Success.
DGS-3620-28PC:admin#
49-15 create ipv6 standard access_list
Description
This command is used to create an IPv6 access list used to filter routes.
Format
create ipv6 standard access_list <list_name 16>