D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
600
<map_name 16> - Enter the route map name used here. This name can be up to 16
characters long.
all_seqence - (Optional) Specifies that all sequence entries will be removed from the route map.
all - Specifies to delete all route maps.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the route map named “map1”:
DGS-3620-28PC:admin# delete route_map map_name map1
Command: delete route_map map_name map1
Success.
DGS-3620-28PC:admin#
49-13 show route_map
Description
This command is used to display the route map configuration.
Format
show route_map {<map_name 16>}
Parameters
<map_name 16> - Enter the route map name used here. This name can be up to 16 characters
long.
Restrictions
None.
Example
To show the route map named “map1”:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English