D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
604
deny - Specifies to deny matched networks.
permit - Specifies to permit matched networks.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to configure the IPv6 access list “List1” to add one entry.
DGS-3620-28PC:admin# config ipv6 standard access_list List1 add 3000::/64
permit
Command: config ipv6 standard access_list List1 add 3000::/64 permit
Success.
DGS-3620-28PC:admin#
49-18 show ipv6 prefix_list
Description
This command is used to display an IPv6 prefix list.
Format
show ipv6 prefix_list {<list_name 16>}
Parameters
<list_name 16> - (Optional) Enter the prefix list's name that will be displayed. This name can be
up to 16 characters long.
If no parameter is specified, all prefix lists will be displayed.
Restrictions
None.
Example
This example shows how to display all IPv6 prefix lists on this Switch.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English