xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
605
DGS-3620-28PC:admin#show ipv6 prefix_list
Command: show ipv6 prefix_list
IPv6 Prefix list: ipv6
Description:
Total Rule Number: 1
sequence 5 permit 2000::/64 le 80
Total IPv6 Prefix Number: 1
49-19 show ipv6 standard access_list
Description
This command is used to display the information of the IPv6 access list.
Format
show ipv6 standard access_list {<list_name 16>}
Parameters
<list_name 16> - (Optional) Enter the access list's name that will be displayed. This name can be
up to 16 characters long.
If no parameter is specified, all access lists will be displayed.
Restrictions
None.
Example
This example shows how to display all the IPv6 access list on this Switch.
DGS-3620-28PC:admin#show ipv6 standard access_list
Command: show ipv6 standard access_list
IPv6 standard Access_list: List1
Total entries number: 1
filter: permit 3000::/64
Total Access_list number: 1
49-20 clear ipv6 prefix_list counter
Description
This command is used to clear IPv6 prefix list hit counters. The hit count is a value indicating the
number of matches to a specific prefix list entry.
To Next Page
Loading...
Need help?
General