D-Link xStack DGS-3620 Series - Page 611

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
606
Format
clear ipv6 prefix_list counter [<list_name 16> {<ipv6_networkaddr>} | all]
Parameters
<list_name 16> - Enter the prefix list's name that will be cleared here. This name can be up to 16
characters long.
<ipv6_networkaddr> - Enter the IPv6 network address used here.
all - Specifies that all prefix list counters will be cleared.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to clear all IPv6 prefix list counters
DGS-3620-28PC:admin# clear ipv6 prefix_list counter all
Command: clear ipv6 prefix_list counter all
Success.
DGS-3620-28PC:admin#
49-21 delete ipv6 prefix_list
Description
This command is used to delete an IPv6 prefix list.
Format
delete ipv6 prefix_list [list_name <list_name 16> | all]
Parameters
list_name - Specifies the prefix list's name that will be deleted.
<list_name 16> - Enter the prefix list's name here. This name can be up to 16 characters
long.
all - Specifies that all IPv6 prefix lists will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to delete an IPv6 prefix list named “ipv6”.