D-Link xStack DGS-3620 Series - Page 612

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
607
DGS-3620-28PC:admin# delete ipv6 prefix_list list_name ipv6
Command: delete ipv6 prefix_list list_name ipv6
Success.
DGS-3620-28PC:admin#
49-22 delete ipv6 standard access_list
Description
This command is used to delete an IPv6 access list identified by the access list name.
Format
delete ipv6 standard access_list [list_name <list_name 16> | all]
Parameters
list_name - Specifies the access list's name that will be deleted.
<list_name 16> - Enter the access list's name here. This name can be up to 16 characters
long.
all - Specifies that all the IPv6 access lists will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to delete an IPv6 access list with the name ”List1”.
DGS-3620-28PC:admin# delete ipv6 standard access_list list_name List1
Command: delete ipv6 standard access_list list_name List1
Success.
DGS-3620-28PC:admin#