D-Link xStack DGS-3620 Series - Page 66

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
61
Success.
DGS-3620-28PC:admin#
4-3 show authen_policy
Description
This command is used to display whether system access authentication policy is enabled or
disabled.
Format
show authen_policy
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display system access authentication policy:
DGS-3620-28PC:admin#show authen_policy
Command: show authen_policy
Authentication Policy : Disabled
Authentication Policy Encryption: Disabled
DGS-3620-28PC:admin#
4-4 enable authen_policy_encryption
Description
This command is used to enable the authentication policy encryption. When enabled, TACACS+
and RADIUS key will be in the encrypted form.
Format
enable authen_policy_encryption
Parameters
None.