D-Link xStack DGS-3620 Series

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
657
Example
To enable the ND snooping function on the Switch:
DGS-3620-28PC:admin# enable address_binding nd_snoop
Command: enable address_binding nd_snoop
Success.
DGS-3620-28PC:admin#
53-22 disable address_binding nd_snoop
Description
This command is used to disable ND snooping on the Switch.
Format
disable address_binding nd_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the DHCPv6 snooping function on the Switch:
DGS-3620-28PC:admin# disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
DGS-3620-28PC:admin#
53-23 config address_binding nd_snoop ports
Description
This command is used to specify the maximum number of entries that can be learned with ND
snooping.
Format
config address_binding nd_snoop ports [<portlist> | all] max_entry [<value 1-50> | no_limit]