D-Link xStack DGS-3620 Series - Page 693

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
688
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete authentication entries:
DGS-3620-28PC:admin#clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS-3620-28PC:admin#
54-28 config jwac authenticate_page
Description
This command is used by administrators to decide which authenticate page to use.
Format
config jwac authenticate_page [japanese | english]
Parameters
japanese - Specifies to change to the Japanese page.
english - Specifies to change to the English page. This is the default page.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To customize the authenticate page:
DGS-3620-28PC:admin#config jwac authenticate_page japanese
Command: config jwac authenticate_page japanese
Success.
DGS-3620-28PC:admin#
54-29 show jwac authenticate_page
Description
This command is used to display the element mapping of the customized authenticate page.