D-Link xStack DGS-3620 Series - Page 737

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
732
60-15 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - Enter a range of ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED
advertisements for port 1:
DGS-3620-28PC:admin#show lldp_med local_ports 1
Command: show lldp_med local_ports 1
Port ID : 1
-----------------------------------------------------------------
LLDP-MED Capabilities Support:
Capabilities :Support
Network Policy :Support
Location Identification :Not Support
Extended Power Via MDI PSE :Support
Extended Power Via MDI PD :Not Support
Inventory :Support
Network Policy:
None
Extended Power Via MDI:
None
DGS-3620-28PC:admin#
60-16 show lldp_med remote_ports
Description
This command is used to display LLDP-MED information learned from neighbors.