D-Link xStack DGS-3620 Series - Page 745

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
740
DGS-3620-28PC:admin#
61-2 show lldp_dcbx ports
Description
This command is used to display the LLDP-DCBX per-port configuration for advertisement options.
Format
show lldp_dcbx ports <portlist>
Parameters
<portlist> - Enter the list of ports that will be displayed here.
Restrictions
None.
Example
This example shows how to display the LLDP-DCBX port configuration for port 1.
DGS-3620-28PC:admin# show lldp_dcbx ports 1:1
Command: show lldp_dcbx ports 1:1
Port ID : 1:1
LLDP-DCBX Priority-based Flow Control Configuration TLV : Enabled
DGS-3620-28PC:admin#
61-3 show lldp_dcbx local_ports
Description
This command is used to display the per-port information currently available for populating
outbound LLDP-DCBX advertisements.
Format
show lldp_dcbx local_ports <portlist>
Parameters
<portlist> - Enter the list of ports that will be displayed here.
Restrictions
None.