D-Link xStack DGS-3620 Series - Page 746

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
741
Example
This example shows how to display local port LLDP-DCBX information for port 1.
DGS-3620-28PC:admin# show lldp_dcbx local_ports 1:1
Command: show lldp_dcbx local_ports 1:1
Port ID : 1:1
PFC Basic Configuration
Willing : Disabled
MBC : Disabled
PFC capability : 8
PFC Enable
priority0 : Disabled
priority1 : Disabled
priority2 : Disabled
priority3 : Disabled
priority4 : Disabled
priority5 : Disabled
priority6 : Disabled
priority7 : Disabled
DGS-3620-28PC:admin#
61-4 show lldp_dcbx remote_ports
Description
This command is used to display each physical interface’s information currently learned from the
neighbor.
Format
show lldp_dcbx remote_ports <portlist>
Parameters
<portlist> - Enter the list of ports that will be displayed here.
Restrictions
None.
Example
This example shows how to display remote entry information for port 1.
DGS-3620-28PC:admin# show lldp_dcbx remote_ports 1:1
Command: show lldp_dcbx remote_ports 1:1
Port ID : 1:1