D-Link xStack DGS-3620 Series - Page 817

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
812
Parameters
<vlan_name 32> - Enter the name of the multicast VLAN to be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an MLD snooping multicast VLAN called “v1”:
DGS-3620-28PC:admin#delete mld_snooping multicast_vlan v1
Command: delete mld_snooping multicast_vlan v1
Success.
DGS-3620-28PC:admin#
70-10 enable mld_snooping multicast_vlan
Description
This command is used to enable the MLD snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
enable mld_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable MLD snooping multicast VLAN:
DGS-3620-28PC:admin#enable mld_snooping multicast_vlan
Command: enable mld_snooping multicast_vlan
Success.
DGS-3620-28PC:admin#