D-Link xStack DGS-3620 Series - Page 818

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
813
70-11 disable mld_snooping multicast_vlan
Description
This command is used to disable the MLD snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
disable mld_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable MLD snooping multicast VLAN:
DGS-3620-28PC:admin#disable mld_snooping multicast_vlan
Command: disable mld_snooping multicast_vlan
Success.
DGS-3620-28PC:admin#
70-12 show mld_snooping multicast_vlan
Description
This command allows information for a specific multicast VLAN to be displayed.
Format
show mld_snooping multicast_vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specifies the name of the multicast VLAN to be displayed.
If no parameter is specified, the system will display all multicast VLANs on the switch.
Restrictions
None.