D-Link xStack DGS-3620 Series - Page 820

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
815
DGS-3620-28PC:admin#config mld_snooping multicast_vlan forward_unmatched enable
Command: config mld_snooping multicast_vlan forward_unmatched enable
Success.
DGS-3620-28PC:admin#
70-14 config mld_snooping multicast_vlan auto_assign_vlan
Description
This command is used to enable or disable the MLD snopping multicast VLAN automatic
assignment feature.
Format
config mld_snooping multicast_vlan auto_assign_vlan [enable | disable]
Parameters
enable - Specifies to enable the MLD snooping multicast VLAN automatic assignment feature.
disable - Specifies to disable the MLD snooping multicast VLAN automatic assignment feature.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the MLD snooping multicast VLAN automatic assignment feature:
DGS-3620-28PC:admin#config mld_snooping multicast_vlan auto_assign_vlan enable
Command: config mld_snooping multicast_vlan auto_assign_vlan enable
Success.
DGS-3620-28PC:admin#