D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
818
DGS-3620-28PC:admin#show greeting_message
Command: show greeting_message
===============================================================================
=
DGS-3620-28PC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 3.00.004
Copyright(C) 2017 D-Link Corporation. All rights reserved.
===============================================================================
=
DGS-3620-28PC:admin#
71-3 config command_prompt
Description
This command is used to modify the command prompt. The current command prompt consists of
four parts: “product name” + “:” + ”user level” + ”#” (e.g. “DGS-3620-28PC:admin#”). This
command is used to modify the first part (1. “product name”) with a string consisting of a maximum
of 16 characters, or to be replaced with the users’ login user name.
Format
config command_prompt [<string 16> | username | default]
Parameters
<string 16> - Enter the new command prompt string of no more than 16 characters.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English