xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
819
username - Specifies the command to set the login username as the command prompt.
default - Specifies the command to return the command prompt to its original factory default
value.
Restrictions
When users issue the “reset” command, the current command prompt will remain in tact. Issuing
the “reset system” will return the command prompt to its original factory default value.
Only Administrators and Operators can issue this command.
Example
To edit the command prompt:
DGS-3620-28PC:admin#config command_prompt HQ0001
Command: config command_prompt HQ0001
Success.
To Next Page
Loading...
Need help?
General