D-Link xStack DGS-3620 Series - Page 833

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
828
DGS-3620-28PC:admin# show nlb fdb
Command: show nlb fdb
MAC Address VLAN ID Egress Ports
----------------- ---------- ---------------------------------------------
00-00-00-00-00-01 ---- ----
02-BF-01-01-01-01 ---- ----
01-00-00-00-00-01 1 ----
Total Entries :3
DGS-3620-28PC:admin#
73-5 create nlb unicast_fdb
Description
This command is used to create the NLB unicast FDB entry.
Format
create nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Enter the MAC address of the NLB unicast FDB entry to be created.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an NLB unicast MAC forwarding entry, for the product that support the VLAN information
on the unicast forwarding:
DGS-3620-28PC:admin#create nlb unicast_fdb 02-bf-01-01-01-01
Command: create nlb unicast_fdb 02-BF-01-01-01-01
Success.
DGS-3620-28PC:admin#
73-6 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB
entry.