D-Link xStack DGS-3620 Series - Page 834

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
829
Format
config nlb unicast_fdb <macaddr> [add | delete] <portlist>
Parameters
<macaddr> - Enter the MAC address of the NLB unicast FDB entry to be configured.
add - Specifies to add the ports.
delete - Specifies to delete the ports.
<portlist> - Enter a list of forwarding ports to be added or removed.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure NLB unicast FDB entry, for the product that support the VLAN information on the
unicast forwarding:
DGS-3620-28PC:admin#config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Command: config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Success.
DGS-3620-28PC:admin#
73-7 delete nlb unicast_fdb
Description
This command is used to delete the NLB unicast FDB entry.
Format
delete nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Enter the MAC address of the NLB unicast FDB entry to be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the NLB unicast FDB entry, for the product that support the VLAN information on the
unicast forwarding: