D-Link xStack DGS-3620 Series - Page 880

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
875
Parameters
<key_id> - Enter the key ID of MD5 to be used here. The value is between 1 and 255.
md5 - Specifies to use the MD5 algorithm.
<string 32> - Enter the MD5 key with a maximum of 32 characters.
Restriction
Only Administrators, Operators and Power Users can issue this command.
Examples
To add an NTP authentication key:
DGS-3620-28PC:admin# config ntp authentication key add 42 md5 aNiceKey
Command: config ntp authentication key add 42 md5 aNiceKey
Success.
DGS-3620-28PC:admin#
76-5 config ntp authentication key delete
Description
This command is used to delete the authentication key for the NTP authentication.
Format
config ntp authentication key delete <key_id>
Parameters
<key_id> - Enter the key ID of MD5 to be used here. The value is between 1 and 255.
Restriction
Only Administrators, Operators and Power Users can issue this command.
Examples
To delete an NTP authentication key:
DGS-3620-28PC:admin# config ntp authentication key delete 42
Command: config ntp authentication key delete 42
Success.
DGS-3620-28PC:admin#