D-Link xStack DGS-3620 Series - Page 889

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
884
DGS-3620-28PC:admin# config ntp update-calendar state enable
Command: config ntp update-calendar state enable
Success.
DGS-3620-28PC:admin#
76-17 enable ntp
Description
This command is used to enable the NTP service.
Format
enable ntp
Parameters
None.
Restriction
Only Administrators, Operators and Power Users can issue this command.
Examples
To enable NTP:
DGS-3620-28PC:admin# enable ntp
Command: enable ntp
Success.
DGS-3620-28PC:admin#
76-18 disable ntp
Description
This command is used to disable the NTP service.
Format
disable ntp
Parameters
None.