D-Link xStack DGS-3620 Series - Page 910

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
905
78-12 delete ospf host_route
Description
This command is used to delete an OSPF host route.
Format
delete ospf host_route <ipaddr>
Parameters
<ipaddr> - Enter the host’s IP address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an OSPF host route:
DGS-3620-28PC:admin# delete ospf host_route 10.48.74.122
Command: delete ospf host_route 10.48.74.122
Success.
DGS-3620-28PC:admin#
78-13 show ospf host_route
Description
This command is used to display the current OSPF host route table.
Format
show ospf host_route {<ipaddr>}
Parameters
<ipaddr> - (Optional) Enter the host’s IP address used here.
Restrictions
None.
Example
To display the OSPF host route settings: