User's Manual
82
Figure 6-15 Passerby database
Table 6-10 Parameters of creating passerby database
Parameter Description
Name Enter the name of the database.
Number of Images
Configure how many face images the database can store.
●
Maximum = Total number of face images of the Device - the face
image number of the current sample databases - the face image
number of the current passerby databases.
●
Minimum: 10,000.
Snapshot Angle
Set the allowed pitch angle and yaw angle of the face image. The value
ranges from 0 through 45 degrees. The smaller the angle, the more
accurate the face image.
Quality
Set a quality threshold. Only face images at or above the threshold can be
added.
Storage Full
The storage strategy when storage space is used up.
●
Stop
: No more images can be added.
●
Overwrite
: The newest images overwrite the oldest images.
Remember to back up the old images as necessary.
To Next Page
Loading...
