User's Manual
180
Parameter Description
RTSP
Set according to the actual requirements. The default value is 554. The
value ranges from 1 to 65535.
HTTP
Set according to the actual requirements. The default value is 80. The
value ranges from 1 to 65535.
If the value you set is not 80, remember to add the port number after
the IP address when you are using a browser to log in to the device.
HTTPS
Set according to the actual requirements. The default value is 443. The
value ranges from 1 to 65535.
UDP
Set according to the actual requirements. The default value is 37778.
The value ranges from 1025 to 65535.
Step 5 Click
Apply
.
The system restarts the corresponding services of the ports.
8.2.2 Network Apps
Set the parameters of network applications, so that system can connect to other devices.
8.2.2.1 P2P
P2P is a peer to peer technology. You can scan the QR code to download mobile app without DDNS
service or the port mapping or installing the transmission server. After you register the Device to the
app, you can view the remote videos, play back recorded videos and more.
●
Make sure that the Device has connected to the network.
●
To use the P2P function, we will collect information such as IP address, MAC address, and serial
number. The collected information is only used for remote access.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Network
.
You can also click
Network
from the configuration list on the home page.
Step 3 Select
Network Application
>
Platform Access
.
To Next Page
Loading...
Need help?
General
