User's Manual
89
●
The
Path is the one where the exported bin file is saved.
●
The
Password is the one used when the file is being imported.
If the bin file being exported is larger than 4 GB, the file is divided into multiple parts, with
the first named as device name_database name_exporting time_part1.zip.
6.3.3.4.3 Adding Face Image
Add face images to the created face database in the way of manual add, batch import, bin import or
detection.
Make sure that you have obtained the face image and saved it in the proper path.
●
When operating on the local interface, save the image in the USB storage device and then
connect the USB storage device to the Device.
●
When operating on the web or PCAPP interface, save the image on the PC in which the web or
PCAPP is located.
Manual Add
You can add human face image one by one. If the registered human face image quantity is small,
you can use manual add mode.
1. On
LIVE page, click , and then select FILE > Face Management > Face Database > Local.
2. Double-click a face database.
3. Click
Manual Add.
Figure 6-42 Manual add
4. Click and select face image.
To Next Page
Loading...
Need help?
General
