User's Manual
94
Table 6-17 Parameter description of queuing detection
Parameter Description
Queue People No. Alarm
1. Click to enable the alarm.
2. Set people number threshold.
●
If you select
≥ Threshold
and then enter a number, an
alarm is triggered when the detected number is larger or
equal to the number that you entered.
●
If you select
≤ Threshold
and then enter a number, an
alarm is triggered when the detected number is smaller or
equal to the number that you entered.
●
If you select
= Threshold
and then enter a number, an
alarm is triggered when the detected number is equal to
the number that you entered.
●
If you select
≠ Threshold
and then enter a number, an
alarm is triggered when the detected number is different
from the number that you entered.
Queuing Time Alarm
1. Click to enable the alarm.
2. Set time threshold for the alarm. When the queuing time of
any person in the area is longer than the threshold, an alarm
will be triggered.
Step 7 Click
Schedule
to select a schedule from the drop-down list.
The system triggers corresponding alarm actions only during the alarm deployment
period.
You can select an existing schedule from the
Schedule
drop-down list. You can also add a
new schedule.
Step 8 Click
Select
next to
Event Linkage
to set alarm actions.
Step 9 Click
Save
.
6.4.5 Live View
Log in to the PC client, and then under the
Live
tab, open a view window that contains people
counting video. You can view the real-time people number and queuing time on the video. The
region frame flashes when there is an alarm. The queue-detection live view also shows head frames
and the dwell time of each person.
6.4.6 Viewing AI Report
Procedure
Step 1 Log in to the PC client.
Step 2 On the home page, select
AI Report
>
AI Report
>
People Counting
.
Step 3 Select a device. You can only select an AI fisheye camera or people counting camera.
Step 4 Select an event type from
People Counting
,
Area People Counting
and
Queue People
To Next Page
Loading...
Need help?
General
