User's Manual
313
Step 4 Enter the login password of current user, and then click OK.
Figure 8-114 ONVIF property
Step 5 Set parameters.
Table 8-38 ONVIF parameters description
username
Set ONVIF username.
The name ranges from 1 to 31 characters. It can contain English
letters, number and special character (_ @ .).
Group name Displays user organization node. System automatically identifies it.
Password Set ONVIF user password.
The password ranges from 8 to 32 non-empty characters. It can
contain letters, numbers and special characters (excluding '";:& and
space) .The password shall contain at least two categories. Usually we
recommend the strong password.
Confirm Password
Description Enter ONVIF user description information.
Step 6 Click Save.
8.7.4.2 Deleting ONVIF User
Deleting the admin account is not supported.
Step 1 Click , or click on the configuration page, and then select ACCOUNT.
Step 2 Select ONVIF and click .
Step 3 Enter current user’s login password, and then click OK.
To Next Page
Loading...
