User's Manual
222
8.2.2.2.1 Modifying IP of Unconnected Devices
●
You can only modify the IP address of initialized devices.
●
You can only modify the IP address of remote devices connected with private protocol.
Step 1 Click , or click on the configuration page, and then select
DEVICE.
Step 2 Click or click Add, and then select Smart Add.
Step 3 Click Start Search.
System starts to search and displays result.
Figure 8-5 Remote device
Step 4 Select a remote device and then click Modify IP.
To Next Page
Loading...
Need help?
General
