User's Manual
307
Step 5 In the New Password box, enter the new password and enter it again in the Confirm
Password box.
Step 6 Click OK.
8.7.3.2 Resetting Password
You can use email address or answer the security questions to reset password once you forgot it.
You can only reset password on the local interface of the Device.
When password resetting function is not enabled, the password cannot be reset if the security
questions are not set.
8.7.3.2.1 Leaving Email Address and Security Questions
Enable the password reset function, leave an email address and set security questions. You can only
use the local interface to set security questions.
Step 1 Click , or click on the configuration page, and then select
ACCOUNT.
Step 2 Select the root node in the device tree on the left.
Step 3 Click to enable the password reset function.
Step 4 Enter an email address for resetting password.
Step 5 Set security questions. Only available on the local interface of the Device.
Step 6 Click Save.
8.7.3.2.2 Resetting Password on Local Interface
Step 1 Connect a display to the Device, and then go to the Login page of the Device.
Figure 8-105 Login
Step 2 Click Forgot Password?.
Step 3 Click OK.
●
If you have set the email address information, the QR code is displayed.
●
If you have not set the email address information, the email address interface is
displayed. After you set the email address information and click
Next, the QR code is
displayed.
To Next Page
Loading...
Need help?
General
