User's Manual
37
Figure 5-3 Password protection
Step 7 Set password protection information.
You can use the email you input here or answer the security questions to reset admin
password. See "8.7.3.2 Resetting Password" for detailed information.
●
Click to cancel the email or security questions.
●
If the email is not set, the password can be reset on the local interface only.
Table 5-3 Password protection
Email Leave an email address for resetting password.
Security question
Set security questions and corresponding answers. Reset the
password through the security question.
Step 8 Click Finish to complete device initialization.
5.2 Quick Settings
After initializing the device, the system goes to quick settings page. You can quickly set system time,
IP address, and P2P.
5.2.1 Configuring IP Address
Configure device IP address, DNS server information and other information according to network
planning.
Device has 4 Ethernet ports by default. Make sure that at least one Ethernet port has been connected
to the network before you set IP address.
To Next Page
Loading...
Need help?
General
