To Next Page

To Previous Page

User's Manual

212

You can select an existing schedule from the

Schedule

drop-down list. You can also add a

new schedule.

Step 7 Click

Select

next to

Event Linkage

to set alarm actions.

Step 8 Click

Save

8.3.3.3 IPC External Alarm

Set the external alarm input event, so that when there is an alarm input to the remote device, the

remote device uploads the alarm to the Device. If the remote device has multiple IO ports, you can

set the alarm input event for each port.

Procedure

Step 1 Log in to the PC client.

Step 2 Click on the upper-right corner and then click

Event

You can also click

Event

from the configuration list on the home page.

Step 3 Select a remote device from the device tree.

Step 4 Select

External Alarm

Alarm-in Port1

Figure 8-45 Alarm-in port 1

Step 5 Click to enable the alarm.

Step 6 Set parameters.

Table 8-20 External alarm parameters description

Parameter Description

Name Enter a name for the alarm.

Dahua Technology IVSS User Manual

Questions and Answers: