User's Manual
189
After registration, you can log in to the DDNS website to view the information of all the connected
devices under the registered account.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Network
.
You can also click
Network
from the configuration list on the home page.
Step 3 Select
Network Application
>
DDNS
.
Figure 8-23 DDNS
Step 4 Click to enable the DDNS function.
After you enable the DDNS function, the third-party server might collect your device
information. Pay attention to privacy security.
Step 5 Set the parameters.
Table 8-13 DDNS parameters
Parameters Description
Type Select the type of the DDNS service provider and then corresponding
address displays.
●
Dyndns DDNS: members.dyndns.org
●
NO-IP DDNS: dynupdate.no-ip.com
●
CN99 DDNS: members.3322.org
Server Address
Domain Enter the domain name that you have registered on the DDNS website.
Username
Enter the username and password obtained from DDNS service provider.
To Next Page
Loading...
Need help?
General
