User's Manual
99
Figure 6-53 Face recognition (AI by Device)
Step 4 Click AI by Device, and then click .
Step 5 Click Deployment Time to select schedule from the drop-down list.
After setting arm period, system triggers actions when there is a motion detection alarm in
the specified period.
●
Click
View Schedule to view detailed schedule settings.
●
If the schedule is not added or the added schedule does not meet actual needs, click
Add Schedule. See "8.8.4 Schedule" for detailed information.
Step 6 Set stranger mode.
Enable stranger mode. Once the face recognition similarity is lower than the specified
value, system triggers an alarm.
1) Click to enable stranger mode.
Figure 6-54 Stranger control mode
2) Set parameters.
Table 6-10 Stranger control mode description
AI alarm rule
Click to set alarm rule box color.
Show feature panel
Click to enable features panel function. System displays
stranger panel once there is an alarm.
3) Click Actions to set alarm actions. See "8.4.1 Alarm Actions" for detailed information.
Step 7 Set linked face database.
Repeat the step to trigger several human databases at the same time.
1) Click Associate Face database, and then select the triggered human face database.
To Next Page
Loading...
Need help?
General
