PackTrack™
Reference Manual 235
16. Click Calibrate 3. PackTrack data is displayed for the third code.
17. Click Compute Results. The results are displayed at the top of the PackTrack
Calibration window.
18. Click Update. "Update Successful" should be displayed in the PackTrack Cal-
ibration window.
19. Select Le
g2 from the drop-down list at the top of the wizard window.
20. Reposition the system barcode, rotating it on the box, so it matches the
angl
e of the Leg 2 laser line. Set the box, with the barcode in the scan line,
close to the left edge of the conveyor bed. The label should be placed close
to the conveyor bed.
To Next Page
Loading...
Need help?
General
