Dell Force10 S2410-01-10GE-24P - Show Vlan Port

138 | VLAN Commands
www.dell.com | support.dell.com
Example
Figure 7-46. Output of the show vlan association subnet Command
Related
Commands
show vlan port
Display 802.1Q port parameters.
Syntax
show vlan port {unit/slot/port | all}
Parameters
Mode
Privileged Exec
Command
History
Force10#show vlan association subnet
IP Address IP Mask VLAN ID
---------------- ---------------- -------
2.2.2.2 255.0.0.0 6
3.3.3.2 255.0.0.0 7
Force10-S50V #show vlan association subnet 2.2.2.2 255.0.0.0
IP Address IP Mask VLAN ID
---------------- ---------------- -------
2.2.2.2 255.0.0.0 6
show vlan association
mac
Display information about either all MAC-based VLANs or the VLAN associated
with a specific MAC address.
show port Displays port information for a selected port or for all ports
interface vlan Creates a VLAN or selects an already-created VLAN.
vlan association
subnet
Configures an IP subnet-based VLAN by associating the VLAN with an IP address
and subnet mask.
unit/slot/port
Enter interface in unit/slot/port format for retrieving information about the
associated interface.
all Enter all for retrieving information about all interfaces.
Version 2.1 Introduced