Dell Force10 S2410-01-10GE-24P - Set Igmp Mrouter Interface; Show Igmpsnooping

IGMP Snooping Commands | 283
set igmp mrouter interface
Command
History
Related
Commands
set igmp mrouter
Command
History
Related
Commands
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed whether or
not IGMP Snooping is enabled.
Syntax
show igmpsnooping [unit/slot/port | 1-3965 | mrouter interface unit/slot/port]
Mode
Privileged Exec
Command
History
Version 2.3
Revised to
igmp mrouter interface.
igmp enable (interface) Enables IGMP Snooping on a selected interface.
igmp mrouter interface
enable
Configures a selected interface as a multicast router interface.
Version 2.3
Revised to
igmp mrouter.
igmp mrouter Enables IGMP Snooping on a selected interface.
igmp enable (global) Enables IGMP Snooping.
Parameters
unit/slot/port
(OPTIONAL) Display ports on which Multicast routers are detected. Enter
interface in unit/slot/port format.
1-3965
(OPTIONAL) Display VLANs for the specified interface on which
Multicast routers are detected.
mrouter interface {
unit/slot/
port | vlan 1-3965}
(OPTIONAL) See show igmpsnooping mrouter interface on page 285.
Version 2.3
Modified:
1-3965 option added (VLAN ID).