Dell Force10 S2410-01-10GE-24P - Spanning-Tree Mstp Edge-Port (Lag)

308 | LAG/Port Channel Commands
www.dell.com | support.dell.com
Defaults
128 (priority)
Mode
Interface Port Channel Config
Command
History
spanning-tree mstp edge-port (LAG)
This command enables/disables spanning-tree MSTP edge-port mode.
Syntax
[no] spanning-tree mstp edge-port
Defaults
disabled
Mode
Interface Port Channel Config
Command
History
Version 2.5.1 Introduced in the new Interface Port Channel Config mode
Related
Commands
interface port-channel Defines a port channel and invokes the Interface Port Channel Config mode
spanning-tree (LAG) Sets the spanning-tree operational mode on the selected port channel
spanning-tree Sets the spanning-tree operational mode to enabled at the global level.
Version 2.5.1 Introduced in the new Interface Port Channel Config mode
Related
Commands
spanning-tree (LAG) Sets the spanning-tree operational mode on the selected port channel
spanning-tree Sets the spanning-tree operational mode to enabled at the global level.