314 | Spanning Tree (STP) Commands
www.dell.com | support.dell.com
Edge Port—The configured value indicating if this port is an edge port.
Edge Port Status—The derived value of the edge port status. True if operating as an edge port; false
otherwise.
Point To Point MAC Status—Derived value indicating if this port is part of a point to point link
CST Regional Root—The regional root identifier in use for this port
CST Port Cost—The configured path cost for this port
show spanning-tree mst port summary
This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter mstid indicates a particular MST instance. The parameter {unit/slot/port | all}
indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the mstid, then the status summary is displayed for
one or all ports within the common and internal spanning tree.
Syntax
show spanning-tree mst port summary mstid {unit/slot/port | gg}
Mode
Privileged Exec and User Exec
Report Fields Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
Type—Currently not used.
STP State—The forwarding state of the port in the specified spanning tree instance
Port Role—The role of the specified port within the spanning tree.
show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in the switch.
On execution, the following details are displayed.
Syntax
show spanning-tree mst summary
Mode
Privileged Exec and User Exec
Report Fields MST Instance ID List
List of multiple spanning trees IDs currently configured.
For each MSTID:
Related
Commands
spanning-tree hello-time Sets the Admin Hello Time for the selected port in the common and internal
spanning tree.
spanning-tree edgeport Designates the selected port as an edge port.
To Next Page
Loading...
Need help?
General
