Dell Force10 S2410-01-10GE-24P Command Reference

144 | VLAN Commands
www.dell.com | support.dell.com
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN.
Mode
Global Config
Command
History
Related
Commands
vlan port acceptframe
This command sets the frame acceptance mode for all interfaces.
Mode
Global Config
Command
History
Related
Commands
vlan port ingressfilter all
This command enables ingress filtering for all ports.
Mode
Global Config
Command
History
Related
Commands
vlan port pvid all
This command changes the VLAN ID for all interfaces.
Mode
Global Config
Command
History
Version 2.5.1 Deprecated. Removed from CLI
Version 2.3 Modified: Moved from Interface Config mode to Global Config mode.
tagged Configure a tagged interface in the selected VLAN.
untagged Configure an untagged interface in the selected VLAN.
Version 2.5.1 Deprecated. Removed from CLI
tagged Configure a tagged interface in the selected VLAN.
untagged Configure an untagged interface in the selected VLAN.
Version 2.5.1 Deprecated. Removed from CLI
tagged Configure a tagged interface in the selected VLAN.
untagged Configure an untagged interface in the selected VLAN.
Version 2.5.1 Deprecated. Removed from CLI

Dell Force10 S2410-01-10GE-24P Specifications

General

Manageable	Yes
Jumbo Frame Support	Yes
Product Type	Switch
Uplink Ports	4 x 10 Gigabit SFP+
MAC Address Table Size	32K entries
Operating Temperature	0 °C to 40 °C
Storage Temperature	-40 °C to 70 °C
Power Supply	Internal