Dell Force10 S2410-01-10GE-24P Command Reference

260 | GARP Commands
www.dell.com | support.dell.com
Port GMRP Mode—Indicates the GMRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The
factory default is disabled.
Port GVRP Mode—Indicates the GVRP administrative mode for the port. It may be enabled or disabled.
If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory
default is disabled.
show mac-address-table gmrp
This command displays the GARP Multicast Registration Protocol (GMRP) entries in the Multicast
Forwarding Database (MFDB) table.
Syntax
show mac-address-table gmrp
Mode
Privileged Exec
Field
Descriptions
Mac Address—A unicast MAC address for which the switch has forwarding and or filtering information.
The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB. In a system the MAC address will be displayed as 8 bytes.
In an SVL system, the
MAC address will be displayed as 6 bytes.
Type—This displays the type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description—The text description of this multicast table entry
Interfaces—The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:)
Related
Commands
set gmrp interfacemode Enable GARP Multicast Registration Protocol on a selected interface.
gmrp interfacemode enable all Enable GARP Multicast Registration Protocol on all interfaces.

Dell Force10 S2410-01-10GE-24P Specifications

General

Manageable	Yes
Jumbo Frame Support	Yes
Product Type	Switch
Uplink Ports	4 x 10 Gigabit SFP+
MAC Address Table Size	32K entries
Operating Temperature	0 °C to 40 °C
Storage Temperature	-40 °C to 70 °C
Power Supply	Internal