482 | IP Multicast Commands
www.dell.com | support.dell.com
show ip igmp-proxy groups
This command displays information about the subscribed multicast groups that IGMP Proxy reported.
Syntax
show ip igmp-proxy groups
Mode
Privileged Exec and User Exec
Command
History
Report Fields Interface index — The interface number of the IGMP Proxy
Group Address — The IP address of the multicast group
Last Reporter — The IP address of host that last sent a membership report
Up Time (in secs) — The time elapsed since last created
Member State — The status of the entry. Possible values are:
IDLE_MEMBER — The interface has responded to the latest group membership query for this group.
DELAY_MEMBER — The interface is going to send a group membership report to respond to a group
membership query for this group.
Filter Mode — The possible values are Include or Exclude.
Sources — The number of sources attached to the multicast group
show ip igmp-proxy groups detail
This command displays complete information about multicast groups that IGMP Proxy reported.
Syntax
show ip igmp-proxy groups detail
Mode
Privileged Exec and User Exec
Command
History
Report Fields Interface index — The interface number of the IGMP Proxy
Version 2.5.1 Introduced
Related
Commands
ip igmp (global) Sets the administrative mode of IGMP in the router to active.
ip igmp (VLAN) Sets the administrative mode of IGMP for the selected VLAN to active
ip igmp-proxy When used without parameters, this command enables/disables the IGMP Proxy on the
router. When used with the
reset-status keyword, this command resets the host
interface status parameters of the IGMP Proxy router. When used with
unsolicit-report-interval, this command sets the unsolicited report interval for the
IGMP Proxy router.
Version 2.5.1 Introduced
To Next Page
Loading...
