Dell Force10 S2410-01-10GE-24P - Hypertext Transfer Protocol (HTTP) Commands; Show Ip Ssh

212 | Security Commands
www.dell.com | support.dell.com
show ip ssh
This command displays the ssh settings.
Syntax
show ip ssh
Mode
Privileged Exec
Report Fields Administrative Mode—This field indicates whether the administrative mode of SSH is enabled or
disabled.
Protocol Levels—The protocol level may have the values of version 1, version 2 or both versions 1 and
version 2.
Connections—This field specifies the current ssh connections.
SSH Sessions Currently Active
Max SSH Sessions Allowed
SSH Timeout—SSH login timeout configured by
ip ssh timeout command
sshcon maxsessions
Command
History
sshcon timeout
Command
History
Hypertext Transfer Protocol (HTTP) Commands
The commands in this section are:
• ip http javamode enable on page 213
• ip http secure-port on page 213
• ip http secure-protocol on page 213
• ip http secure-server enable on page 214
• ip http server enable on page 214
• show ip http on page 215
This section provides a detailed explanation of the HTTP commands. The commands are divided into
the following groups:
Version 2.3
Replaced by
adunniu, GnEnnaeon.
Version 2.3
Replaced by
ip ssh timeout.
Note: The SFTOS Web UI is not supported in SFTOS v. 2.5.1 or 2.5.2, and the
commands in this section were designed primarily to support the Web UI.