Security Commands | 197
Invalid EAPOL Frames Received—The number of EAPOL frames that have been received by this
authenticator in which the frame type is not recognized
EAP Length Error Frames Received—The number of EAPOL frames that have been received by this
authenticator in which the frame type is not recognized
If the optional parameter summary {unit/slot/port | all} is used, the dot1x configuration for the
specified port or all ports are displayed, as follows:
Example
Figure 11-69. Example of Output from the show dot1x summary Command
Interface—The interface whose configuration is displayed.
Control Mode—The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto
Operating Control Mode—The control mode under which this port is operating. Possible values are
authorized | unauthorized
Reauthentication Enabled—Indicates whether re-authentication is enabled on this port
Port Status—Indicates if the key is transmitted to the supplicant for the specified port
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Syntax
show dot1x users unit/slot/port
Mode
Privileged Exec
Force10 #show dot1x summary 1/0/1
Operating Reauthentication
Interface Control Mode Control Mode Enabled Port Status
--------- ------------------ ------------------ ---------------- -------------
1/0/1 auto auto FALSE Authorized
Force10 #show dot1x summary all
Operating Reauthentication
Interface Control Mode Control Mode Enabled Port Status
--------- ------------------ ------------------ ---------------- -------------
1/0/1 auto auto FALSE Authorized
1/0/2 auto auto FALSE Authorized
1/0/3 auto auto FALSE Authorized
1/0/4 auto auto FALSE Authorized
1/0/5 auto auto FALSE Authorized
1/0/6 auto auto FALSE Authorized
1/0/7 auto auto FALSE Authorized
1/0/8 auto auto FALSE Authorized
1/0/9 auto auto FALSE Authorized
1/0/10 auto auto FALSE Authorized
1/0/11 auto auto FALSE Authorized
-------------output truncated----------------!
To Next Page
Loading...
