Dell Force10 S2410-01-10GE-24P - Logging Facility

System Logs | 171
Use no logging console to disable logging to the console.
Default
disabled; severity = critical
Mode
Global Config
logging facility
Configure the facility type sent to Syslog servers.
Syntax
logging facility [facility-type]
To remove to the configured value, enter no logging facility.
Defaults
local7
Mode
CONFIGURATION
Command
History
Parameters
facility-type
(OPTIONAL) Enter one of the following keywords.
•
auth (authorization system)
•
cron (Cron/at facility)
•
kern (kernel)
•
local0 (local use)
•
local1 (local use)
•
local2 (local use)
•
local3 (local use)
•
local4 (local use)
•
local5 (local use)
•
local6 (local use)
•
local7 (local use)
•
lpr (line printer system)
•
mail (mail system)
•
syslog (Syslog process)
•
user (user process)
•
uucp (Unix to Unix copy process)
The default is local7.
Version 2.5.1 Introduced
Related
Commands
logging buffered Enable logging to a Syslog server.
logging history Specify which messages and how many are logged to the SFTOS logging history table and
through SNMP.
logging host Configure the mirroring of system log messages to a syslog server.
show logging
history
Show the messages stored in the buffered log