Dell Force10 S2410-01-10GE-24P - Page 168

168 | Link Layer Discovery Protocol (LLDP) Commands
www.dell.com | support.dell.com
Example
Figure 8-60. Example Output from show lldp interface Commands
Force10 #show lldp interface 1/0/1
LLDP Interface Configuration
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ------ -------- -------- -------- ------- ----
1/0/1 Down Disabled Disabled Disabled N
TLV Codes: 0- Port Description, 1- System Name
2- System Description, 3- System Capabilities
Force10 #show lldp interface all
LLDP Interface Configuration
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ------ -------- -------- -------- ------- ----
1/0/1 Down Disabled Disabled Disabled N
1/0/2 Down Disabled Disabled Disabled N
1/0/3 Down Disabled Disabled Disabled N
1/0/4 Down Disabled Disabled Disabled N
1/0/5 Down Disabled Disabled Disabled N
----------!output truncated!-----------------------
Related
Commands
lldp mode (global) Enable/disable LLDP globally.
lldp mode (interface) Enable/disable LLDP on a selected interface.
clear lldp neighbors Clear LLDP neighbor information.