Configuring IP Multicast 657
•
Expiry Time (secs)
— The time in seconds before this entry ages out and is removed from the table.
•
RPF Neighbor
— The IP address of the Reverse Path Forwarding neighbor.
•
Protocol
— The multicast routing protocol which created this entry. The possibilities are:
–
PIM-DM
–
PIM-SM
–
DVMRP
•
Flags
— The value displayed in this field is valid if the multicast routing protocol running is PIM-SM.
The possible values are RPT or SPT. For other protocols an "------" is displayed.
Displaying MRoute Summary using the CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• Multicast Commands
To Next Page
Loading...
